Accessories / Cables and Connectors
Neutrik NP3X 3 pole 1/4Inch professional phone plug nickel contacts nickel shell
The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Item In StockThe heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
- No Reviews Yet.
- Be the first to review this product
Product Information
Technical Information
Product |
|
|
Title |
NP3X |
|
Connection Type |
Plug |
|
Gender |
male |
Electrical |
|
|
Contact resistance |
depends on mating connector mΩ |
|
Dielectric strength |
1 kVdc |
|
Insulation resistance |
> 2 GΩ (initial) |
|
Rated current per contact |
depends on mating connector A |
|
Rated voltage |
< 50 V |
Mechanical |
|
|
Cable O.D. |
4 - 7 mm |
|
Lifetime |
> 1000 mating cycles |
|
Wiresize |
1 mm² |
|
Wiresize |
18 AWG |
|
Wiring |
Solder contacts |
Material |
|
|
Bushing |
Polyacetal (POM) + PU |
|
Contact plating |
2 µm Ni (Su) |
|
Contacts |
Brass (CuZn39Pb3) |
|
Insert |
Polyamide (PA 6.6 30 % GR) |
|
Shell |
Zinc diecast (ZnAl4Cu1) |
|
Shell plating |
Nickel |
|
Strain relief |
Polyacetal (POM) |
Environmental |
|
|
Standard compliance |
IEC 60603-11 / EIA RS-453 |
|
Solderability |
Complies with IEC 68-2-20 |
|
Temperature range |
-20 °C to +65 °C |