Studio & Recording / Studio Monitors
Presonus R65 AMT Powered Studio Monirtor (Pair)
The R65 studio monitor features a custom 6.8-square-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. This allows you to hear the “air” and the greater sense of space that is characteristic of audiophile recordings. The R65 studio monitor's transparent and highly accurate sound makes it ideal for use in both commercial and home recording studios as well as broadcast and post-production environments. In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R65 studio monitor uses an incredibly thin, folded Kapton® membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction. An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R65 studio monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R65 speaker design provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R65 studio monitor reacts predictably and sounds consistent from room to room.
The R65 studio monitor features a custom 6.8-square-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. This allows you to hear the “air” and the greater sense of space that is characteristic of audiophile recordings. The R65 studio monitor's transparent and highly accurate sound makes it ideal for use in both commercial and home recording studios as well as broadcast and post-production environments. In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R65 studio monitor uses an incredibly thin, folded Kapton® membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction. An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R65 studio monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R65 speaker design provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R65 studio monitor reacts predictably and sounds consistent from room to room.
- No Reviews Yet.
- Be the first to review this product
Product Information
Technical Specifications
Inputs |
|
1- Balanced XLR |
|
1- Balanced ¼” TRS |
|
1- Unbalanced RCA |
Performance |
|
Frequency Response |
45 Hz – 22 kHz |
Crossover Frequency |
2.7 kHz |
LF Amplifier Power |
100W Class D |
HF Amplifier Power |
50W Class D |
Peak SPL (@ 1 meter) |
104 dB |
LF Driver |
6.5” woven composite |
HF Driver Type |
AMT |
Diaphragm |
6.8-inch2 (4,400 mm2) |
Equiv. Diaphragm ø |
3” (75 mm) |
Input Impedance |
20 kΩ balanced, 10 kΩ unbalanced |
SNR (typical, A-weighted) |
>100 dB |
Power |
|
Factory preprogrammed |
100-120V ?50/60 Hz or 220-240V ?50/60 Hz |
Standby Power |
< 0.5W |
Protection |
|
RF interference |
|
Output-current limiting |
|
Over-temperature |
|
Turn-on/off transient |
|
Subsonic filter |
|
External mains fuse |
User Controls |
|
Volume Range |
A-type taper |
HF Driver |
Linear, +1 dB, -3 dB, -6 dB |
Highpass filter |
Linear, 60 Hz, 80 Hz, 100 Hz |
Acoustic Space |
Linear, -1.5 dB, -3 dB, -6 dB |
Energy Conservation Mode |
On/Off/Query |
Cabinet |
|
Vinyl-laminated, medium-density fiberboard |
Physical |
|
Width |
8” (203 mm) |
Depth |
10.3” (261 mm) |
Height |
13” (328 mm) |
Weight |
14.7 lbs (6.65 kg) |